Sharp UP-3300 - Manual (Page 151)

148
■ Link PLU table
It is possible to link PLUs together so that all PLUs linked together are rung up upon a single key touch.
However, the number of links is a maximum of five. Even if more than five PLUs are linked, the sixth or
higher link is not actualized.
Program each item as follows:
• LINK PLU TABLE (Use the numeric entry)
Link PLU table number (1 through 99)
• LINK PLU #X
Enter linked PLU codes (max. 5 PLUs).
NOTE
• PLU codes should be defined before programming a link PLU
table.
• If the DELETE key is touched on the table number selection menu,
the selected table will be deleted.
Procedure
▼
▼
Selected link
PLU table no.
➞
ENTER