Sharp UP-3300 - Manual (Page 220)

217
Procedure
▼
▼
Price Mode Programming
The PRICE mode programming is chiefly used for daily changes of the PLU’s unit price by supervisor or
manager.
To program a unit price of the PLU as follows:
1.
Select “5 PRICE MODE” from the mode selection window.
• The PLU list will appear.
2.
Select any PLU code from the list.
3.
Program a unit price for corresponding price level.
• PRICE1 through 7 (Use the numeric entry)
Unit price of each price level (max. 6 digits)
By default, only a price for PRICE1 can be entered. If
you want to enter a price for PRICE2 through 7, contact
your authorized SHARP dealer.