Samsung MSYS SF-6900 - Manual (Page 66)

2.34 Automatic dialing
Speed dialing
You can store up to 150 numbers in speed dial locations (1-150).
Storing a number for speed dialing
1. Press and hold Speed/Status for 2 seconds.
2. Enter a speed dial location number to which you want to store a number,
then press Start/Enter .
If a number is already stored in the location, the display shows the
number in the upper line and `ED:1 DEL:2 NXT:3’ in the bottom line.
Press
1 to edit that number, 2 to delete that number, or 3 to keep that
number and choose another location.
3. Enter the number you want to store, then press Start/Enter.
4. To assign a name to the number, enter the desired name. For information
on how to enter names, see page 2.4.
Or
If you don’t want to assign a name, skip this step.
5. Press Start/Enter when the name appears correctly or without entering a
name.
6. To store more telephone numbers, repeat steps 2 through 5.
Or
To return to standby mode, press
Stop .
Using a speed number
1. Load a document you want to send a fax.
2. Press Speed/Status , then enter a speed dial location number.
3. Press Start/Enter to dial the number. The number will be automatically
dialed, and the document be transmitted when the remote fax machine
answers the phone.