Sharp O2 - Manual (Page 85)

Settings 84
Adding a New Network
1. Perform steps 1 to 4 in “Selecting a Network
Automatically”.
2. Press or to select “Add New Network”, then
press .
3. Press or to select “Add”, then press .
4. Enter the country code.
5. Press .
6. Enter the network code.
7. Press .
8. Enter a new network name.
9. Press .
Editing the Preferred List
To Change the Position of a Network in the
Preferred List
1. Perform steps 1 to 4 in “Selecting a Network
Automatically”.
2. Press or to select “Set Preferred”, then press
.
3. Select the name of the network to change the
position from the list by pressing or , then
press .
4. Press or to select “Insert” or “Add to End”,
then press .
To Delete a Network from the Preferred List
1. Perform steps 1 to 3 in “To Change the Position of
a Network in the Preferred List”.
2. Press or to select “Delete”, then press .
Changing the Network Password (M 7-3-2)
1. Perform steps 1 to 3 in “Selecting a Network
Automatically” on page 83.
2. Press or to select “Change Password”, then
press .
3. Enter the old password, then press .
4. Enter a new password, then press .
5. Enter a new password again, then press .
If you enter the incorrect password in step 5, the
screen will return to step 4 and you will be asked to
enter the password again.
6. Press .