Sharp SND-5080 User Manual

Page 27

Advertising
background image

English _27

M

INSTALLATION & CONNECTION

Insert the camera assembly into the hole
so that it fits to the camera hole, and fix
the assembly using the assembly screw
tappings (TH, M4xL30). (x3)

Close the dome cover.

Fix the cover to the main unit. Fit the
protruding part inside the cover into the
corresponding hole of the main unit, and
turn the cover to fix it.

To add an alarm cable

For this, first you should remove the dome
cover from the housing.

Pull out the protruding rubber bar as shown.

This will reveal a hole in the place of the rubber
bar, through which you insert the cable, and
connect it to the alarm terminal on the PCB.

Connect and arrange the necessary cables
(power, video, etc) lest that they should be
damaged or caught while installing the camera.
Then, install the camera assembly in the
reverse order of the disassembly.

Adjust the lens in a desired direction and close
the dome cover.

3.

4.

5.

1.

2.

3.

4.

5.

Advertising