Network connection and setup, Connecting the camera directly to a pppoe modem – Sharp SND-5080 User Manual

Page 44

Advertising
background image

44_ network connection and setup

network connection and setup

CONNECTING THE CAMERA DIRECTLY TO A PPPOE
MODEM

Use the cross LAN cable to connect the network cable directly to your PC.

Run the IP Installer and change the IP address of the camera so that you can use
the web browser on your desktop to connect to the Internet.

Use the Internet browser to connect to the camera.

Move to [Setup] page.

Move to [Network] – [DDNS] and configure the DDNS settings.

Move to [Network] – [Interface], and set the network type to [PPPoE].

Connect the camera, which was removed from your PC, directly to the modem.

Restart the camera.

For registering the DDNS settings, refer to "DDNS". (page 74)

For configuring the DDNS settings, refer to "Registering with DDNS". (page 76)

For setting the network type, refer to "Interface". (page 73)

1.

2.

3.

4.

5.

6.

7.

8.

M



www.samsungc

ctv.com

SNB-5000

Camera

External Remote PC

DDNS Server

(Data Center, KOREA)

PPPoE Modem

INTERNET

Advertising