Static ip setup – Sharp SND-5080 User Manual

Page 47

Advertising
background image

English _47

M

NETWORK

CONNECTION AND

SETUP

UPnP Status

This function is not currently implemented.

URL

DDNS URL address enabling access from the external Internet.
However, this will be replaced with the <IP Address> of the camera if
DDNS registration has failed.

IPv4

Scans for cameras with the IPv4 setting.

IPv6

Scans for cameras with the IPv6 setting.

Search

Scans for cameras that are currently connected to the network.
However, this button will be grayed out if neither IPv4 nor IPv6 is checked.

Auto Set

<IP Installer> will automatically configure the network settings for you.

Manual Set

You should configure the network settings manually.

Exit

Exits the IP Installer program.

STATIC IP SETUP

Manual Network Setup

Run <IP Installer.exe> to display the camera search list.
At the initial startup, both [Auto Set] and [Manual Set] will be grayed out.

For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not
support this function.

Select a camera in the search list.
Find the MAC (Ethernet) address
labeled on the rear of the camera.
Both the [Auto Set] and [Manual Set]
buttons will be activated.

Click [Manual Set].
The Manual Setting dialog appears.
The default values of <IP Address>,
<Subnet Mask>, <Gateway>, <HTTP Port> and <VNP Port> of the camera will
be displayed.
The default <Password> is 4321.

M

1.

2.

Advertising