Sharp SND-5080 - Manual (Page 60)

60_ camera setup
camera setup
Day/Night Mode Setup
You can switch the mode to adjust the black and white level as well as the colors.
▲/▼ Ц ◄/► Ц ENTER Ц ▲/▼ Ц ◄/► Ц ENTER
Select <SPECIAL>.
Select <DAY/NIGHT>, and specify a
desired mode setting value.
AUTO : Displays in color mode during
normal daytime and switches to black
and white mode in a low contrast scene
at night.
Press the [Enter (
)] button to
adjust the switching interval between
the two modes.
If you set the AGC mode to OFF from
<EXPOSURE>, the AUTO DAY/NIGHT mode will be disabled accordingly.
DWELL TIME : This is the time while
each applicable lighting condition is
kept in order to enable the switch
between day and night modes.
DURATION : Adjust the brightness of
the lighting where the mode switch
occurs.
COLOR : Always displays the video in
colors.
BW : Always displays the video in black and white.
When completed, select <RETURN> to return to the previous screen.
1.
2.
y

-
-
y
y
3.
MAIN SETUP
SSDR ON
WHITE BAL ATW
BACKLIGHT OFF
EXPOSURE
SPECIAL
EXIT
SPECIAL SETUP
CAM TITLE OFF
OSD COLOR WHITE
DAY/NIGHT AUTO
IMAGE ADJ
RETURN
DAY/NIGHT AUTO SETUP
DWELL TIME 5 SEC
DURATION SLOW
RETURN