Network setup, Audio setup, Interface – Sharp SND-5080 User Manual

Page 73

Advertising
background image

English _73

M

SETUP

SCREEN

Audio Setup

You can configure the I/O settings of the audio source from the camera.

From the Setup menu, select the
<Audio & Video (

)> tab.

Click <Audio Setup>.

Adjust the audio I/O levels to your
preference.

Audio-In : Set the audio input value.

Audio - Out : Set the audio output
value.

When done, click [Apply].

NETWORK SETUP

Interface

From the Setup menu, select the
<Network (

)> tab.

Click <Interface>.

Set the <Interface> and <IPv6 Setup>
as necessary.

IP Type : Select an IP connection
type.

Manual : Specify the IP address,
Subnet Mask, Gateway, DNS1,
and DNS2.

PPPoE : Specify the DNS1, DNS2, ID and password.

DHCP : Specify the DNS1 and DNS2.

If you set it to <Manual>, you should specify the IP, Subnet Mask, Gateway, DNS 1 & 2 manually.

MAC Address : Shows the MAC address.

IP Address : Displays the current IP address.

Subnet Mask : Displays the <Subnet Mask> for the set IP.

Gateway : Displays the <Gateway> for the set IP.

DNS1/DNS2 : Displays the DNS(Domain Name Service) server address.

IPv6 Use : Specify the use of IPv6.

IPv6 Address : Obtains the IPv6 address to access the IPv6 network.

When done, click [Apply].

1.

2.

3.

y
y

4.

1.

2.

3.

y

-

-

-

y
y
y
y
y
y
y

4.

Advertising