Sharp SND-5080 - Manual (Page 77)

English _77
M
SETUP
SCREEN
To connect to the Samsung DDNS in camera setup
From the DDNS setup page, set <DDNS> to <Samsung DDNS>.
Provide the <User Name> and <Password> that you registered with the DDNS
site.
Click [Apply].
When the connection is successfully
made, you will see the message of
<Success> on the screen.
EVENT SETUP
FTP/Email
You can configure the FTP/Email server settings so that you can transfer the images stored
in the camera to your PC if an event occurs.
From the Setup menu, select the
<Event (
)> tab.
Click <FTP/Email>.
Select <FTP Configuration> or
<Email Configuration> and enter /
select a desired value.
FTP Configuration
Server Address : Enter the IP ad-
dress of the FTP server that you
transfer the alarm images to.
User ID : Enter the user ID with
which you will log in to the FTP
server.
Password : Enter the user account password for logging into the FTP server.
Upload Directory : Specify the FTP path where you will transfer the alarm
images.
Port : The default port of the FTP server is 21; however, you can use a different
port number according to the FTP server settings.
Passive Mode : Select <On> if you need to connect in passive mode due to the
firewall or the FTP server settings.
1.
2.
3.
1.
2.
3.
y
-
-
-
-
-
-