Samsung SV-DVD3E EN - Manual (Page 17)

GB
31
GB
30
Using the Timer Programming Feature
The Timer Programming feature allows you to preset the DVD-VCR
to record a programme up to one month before that programme is
to be broadcast. Up to six programmes can be preset.
☛
Before presetting a recording, check that the date and
time are correct.
1 Insert the cassette and press TIMER on the remote control.
Result:
The timer programme is displayed.
2 Press ❿! to select the input source.
3 Select the required station by pressing the " , ❷ buttons.
4 Press ❿ to select the recording day.
5 Select the required day by pressing the " or ❷ buttons.
6 Press ❿ to select the recording start time.
7 Select the required hour value by pressing the " or ❷ buttons.
8 Press ❿ to select the minutes.
9 Select the required minute value by pressing the " or ❷ buttons.
10 Press ❿ to select the recording stop time.
11 Select the required recording stop time by pressing the " or ❷
buttons, following the same procedure as when selecting the
recording start time.
12 Press ❿ to select the recording speed.
13 Press the " or ❷ buttons to select the SP (Standard Play), LP
(Long Play), AUTO (Auto Tape Speed Select) recording speeds.
14 When you have finished, press the RETURN button.
15 Press the STANDBY/ON button to activate the timer.
Result: Before starting recording, the DVD-VCR compares the
timer duration with the remaining time on the cassette.
➢
Auto Tape Speed Select. The DVD-VCR’s “Auto Tape
Speed Select” function compares the duration of the timer
recording to the actual recording time remaining on the
tape loaded. If there is insufficient tape to complete a
timer recording in AUTO mode, the DVD-VCR
automatically switches to LP mode to record the whole
programme.
2 3
4 5 6
SHUTTLE
STANDBY/ON OPEN/CLOSE
AUDIO
M O D E /
REPEAT
TV/VCR
CLOCK/
COUNTER
15
1/JAN TUE 12:09
PR DAY START → STOP
1 SA 9 12:00 → 12:50SP
-- ---- --:-- → --:----
-- ---- --:-- → --:----
-- ---- --:-- → --:----
-- ---- --:-- → --:----
-- ---- --:-- → --:----
" ❷ ➛❿ SET: ❿
RETURN DELETE:CLEAR
Recording a Programme with Automatic Stop
This function enables you to record up to nine hours (LP) of
programmes.
Your DVD-VCR stops automatically after the requested length of
time.
1 Switch on the television.
2 To monitor the programme being recorded, select the television
channel reserved for use with your DVD-VCR (or the AV input if
used).
3 Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result:
The DVD-VCR is switched on automatically.
4 Select:
◆ The station to be recorded using the PROG ( " or ❷ ) buttons
or
◆ The LINE source using the INPUT SEL. button for a satellite
tuner or external video source
Result: The channel number is displayed and the programme
can be seen on the television.
5 Select the recording speed by pressing the SPEED button as
many times as required (see page 28).
6 Hold the REC button ( ● ) down for a while to start recording.
Result: The record indicator appears on the television screen
and DVD-VCR display. An index is recorded on the
tape (see page 36).
7 Press the REC button ( ● ) several times to increase the recording
time in:
◆ 30-minute intervals up to four hours
◆ 1-hour intervals up to nine hours (LP)
Result: The length is displayed on the television displays. The
selected programme is recorded for the length of time
requested. At the end of that time, the DVD-VCR stops
recording automatically.
8 If you wish to cancel the recording before the end, press
STANDBY/ON.
☛
If the end of the tape is reached while recording:
◆ The recording stops
STANDBY/ON SELECT COPY
PROG REC
EJECT OPEN/CLOSE
L AUDIO R VIDEO LINE IN 2
3
DVD VCR INPUT SEL. VIEW
TRK PROG
DISPLAY
REC DISC MENU
F.ADV/STEP
DIGEST
4
4
REC DISC MENU
SETUP
/ENTER
RETURN TITLE SUBTITLE MARK
A.DUB SPEED TIMER INDEX
6
5
VCR VCR
LENGTH 2:30
SET LENGTH :
PRESS REC ●