Sony SX-215 - Manual (Page 62)

User’s Guide
String Commands
These commands configure strings used with services and service filters.
SET STRing
Set service string table entry. (Note, String 1-11 can not be set or changed).
SET STRing <string #> ”value”
CL STRing
Clears the service string table entry.
CL STRing <string #>
SH STRing [string_num]
Defines the BOT and EOT strings used in services If string_num is provided then the specific string definition and
expansion is displayed. If string_num is not provided, then all string definitions (but not their expansions) are
displayed.
sample output:
1:
2: \1BE
3: \04
4: \1B%-12345X
5: @PJL
6: ENTER LANGUAGE=
7: PCL\0A
8: POSTSCRIPT\0A
9: \FF\04\FF\05\FF\06\FF\07
10: \FF\04\FF\05\FF\06\FF\08
11: \0C
SH FILters
Shows the available filters which can be used to modify a job stream.
sample output:
# Filter
0 No Filter
1 Text Substitution
2 AppleTalk
3 Text to PostScript
4 PostScript Tagged Binary
5 DC1 Special
TCP/IP Commands
Document #40181-420 Rev. B 62