Sony SX-215 - Manual (Page 64)

User’s Guide
SET IP CHKSUM
Enable or disable verification of the IP checksum on received packets
SET IP CHKSUM [ENable | DIsable]
(default = enable)
SET IP BOot
Number of tries for each enabled IP boot method, if not set to STATIC
SET IP BOot n
(default = 3)
SET IP ENable
Enable or disable all IP based protocols
SET IP [ENable | DIsable]
(default = enable)
SET IP FTIme
If enabled, the IP timeout is measured in seconds. If disable, the IP timeout is in minutes.
SET IP FTIme [ENable | DIsable]
(default = disable)
SET IP FTP
Enable or disable the FTP protocol
SET IP FTP [ENable | DIsable]
(default = enable)
SET IP HTTP
Enable or disable the HTTP protocol
SET IP HTTP [ENable | DIsable]
(default = enable)
SET IP KEepalive
Set interval at which TCP keepalive packets are sent on a connection, in minutes.
SET IP KEepalive n
(default = 5 min)
Document #40181-420 Rev. B 64