Sony SX-215 - Manual (Page 70)

User’s Guide
Other Commands
SET DEFAULT
Set parameters to factory defaults
EXIT
This command exits the current configuration console session.
EXIT
SH FATal
Shows fatal error log (if there’s any)
sample output:
No saved errors
CL FATal
Clears the fatal error log
SH FREE
Shows the amount of heap and configuration memory available
sample output:
2 bytes of heap available
Index 2, 6320 bytes
6320 bytes configuration memory available
HElp <command>
This is for getting help on the console commands. You can just type help, or type help and then a command to
display instructions on specific commands.
Sample output:
EXIT/^D Exit program
HElp Information on available commands
INitialize Reset unit
CLear/PUrge/DELete Remove configuration item
SAVE Save configuration to NV memory
SET/DEFine/CHange Modify unit parameters
SHow Display unit parameters
ZEro Zero statistical counts
Type 'HElp <cmd>' for more information
Document #40181-420 Rev. B 70