Wireless print server requirements, User’s guide wireless print server requirements – Sony SX-215 User Manual

Page 9

Advertising
background image

User’s Guide

Wireless Print Server Requirements

To print using the SX-215 wireless print server, you will need an 802.11b or 802.11g wireless network
consisting of either of the following:

An 802.11b or 802.11g wireless-enabled PC or Macintosh printing straight to the printer

(Ad-Hoc or Peer-to-Peer Mode).

An 802.11b or 802.11g wireless access point that allows wireless and wired Ethernet-

enabled computers to print to the wireless print server.

To configure and print to the wireless print server, you will need the following information from your
wireless network administrator:

Wireless Mode used (Infrastructure or Ad-Hoc)

The SSID (service set identifier) for your wireless network.

If you are using TCP/IP (recommended for Windows Networks) and are not connected to

a DHCP server (for obtaining an IP Address automatically), you will need a unique IP Address for
the wireless print server (for example: 192.168.1.14). If the wireless print server is not on the same
IP subnet as the computers you are printing from, you will also need a subnet mask and a router
(default gateway) address.

Wireless security settings

Document #40181-420 Rev. B

9

Advertising