Troubleshooting – Sony HVL-F32X User Manual

Page 29

Advertising
background image

29-GB

Troubleshooting

Symptom

Remedy

The flash does not work • Make sure that this unit is properly inserted

into the advanced accessory shoe, or the
connection cord is properly attached to this
unit when using the connection cord.

• Make sure that the POWER switch on this unit

is “ON”.

• If the READY lamp is not lit (orange), check

the READY lamp again in this instruction
manual.

• The flash does not fire if the subject is bright

with the digital still camera in the AUTO
mode (no display). To forcibly fire the flash
when the subject is bright, press the flash
button on the digital still camera.

• Make sure that the “Hot Shoe” on the digital

still camera is set to [OFF]. (p. 16)

• Depending upon the mode position on the

digital still camera, flash is not fired.
For details, refer to the operating instructions
of your digital still camera again.

Advertising