3 operating the panel pc 670/870, 1 normal operation, Operating the panel pc 670/870 – Siemens Simatic PC Panel PC 870 User Manual

Page 45

Advertising
background image

SIMATIC Panel PC 670/870 Start-Up Instructions

3–1

3 Operating the Panel PC 670/870

3.1 Normal

Operation

The operating system and additional user software is installed on the hard disk.

Note

After all the necessary applications have been installed, it is recommended to
create a mirror image of the hard disk contents. This should then be saved on a
CD-ROM, for example.

Activation

After switching on the power supply, the Panel PC 670/870 performs a self-
test. During the self-test, the message

Press <F2> to enter SETUP

appears briefly.

After the self-test has been completed, the operating system is loaded and the
desktop displayed.

Shut Down

Terminate the operating system using Start

Exit. After the operating system

has been shut down, the Panel PC 670/870 can be disconnected from the
power supply.

Note

In the case of operating systems Windows 98, Windows 2000 and
Windows XP, the Panel PC 670/870 can be disconnected from the power
supply as soon as the display turns dark after terminating the operating system.

Warning

When using the direct key module, ensure that the function and special keys
remain operable until the entire unit has been switched off from the power
supply.

3

Advertising