Transfer files from a pc – Samsung LP10WSLSB/ZA User Manual
Page 17
Get started
17
To transfer files from a PC
Connect the frame to a PC with the supplied USB cable
1
When the frame is turned off, connect it to the PC first, and then
•
turn it on.
Select
2
Mass Storage
.
When connected, ‘
•
Mass Storage’ will appear on the screen and
a pop-up window will appear on the PC.
If you connect the frame to a PC while using it as a mini-monitor
•
(p. 39), you need to switch to Mass Storage mode by using the
Frame Manager program. For more information, refer to the Frame
Manager program’s User Manual.
The removable disk drive will appear as ‘
•
800W’ or ‘1000W’ on the
PC. Open the drive for the corresponding model in My Computer
and copy your photos.
Some files are embedded on the frame by default.
•
When there is not enough memory, delete these
stock files.
If your photos are large, they will consume more
•
memory and the preview will play slowly. Change
the photo resolution to 800 X 600 (for ‘800W’)
or 1024 X 768 (for ‘1000W’). Or set the frame to
copy and automatically resize your photos (Frame
Transfer files from a PC
Connected to PC USB port.
Do not insert or remove storage devices to/
from the Photo Frame while they are
connected to the PC.
You can switch to Mini Monitor mode by
using Frame Manager.
Mass Storage