Sharp PGD210U - Manual (Page 28)

E-27
Using the Black Screen Function
This projector is equipped with a Black Screen Function.
This function can be used to black out the presentation
image.
• Press the BLACK SCREEN button on the projector or the
remote control to display the black screen. Press the BLACK
SCREEN button again to return to the presentation image.
Note:
• When “BLK SCRN DISP” is set to “OFF”, the On-Screen Display
(“BLACK SCREEN”) will not appear during black screen. See below.
LCD Projector
Black Screen On-Screen Display
Override
The On-Screen Display (“BLACK SCREEN”) that appears
during black screen can be turned off. When “BLK
SCRN DISP” is set to “OFF”, the On-Screen Display will
not appear during black screen.
• Press the MENU button. While the MENU screen is displayed,
press the ADJUSTMENT ƒ/∂ buttons to select “IMAGE
ADJ.”. Then press the ENTER button to display the “IMAGE
ADJ.” screen as shown. Press the ADJUSTMENT ƒ/∂ but-
tons to select “BLK SCRN DISP” and press the ADJUST-
MENT ß/© buttons to select “ON” or “OFF”.
B L K S C R N D I S P
I M A G E A D J .
R E V E R S E
I N V E R T
I N P U T D I S P L A Y
: S E L .
: A D J . : E N D MENU
[ O F F ]
[ O F F ]
[ O F F ]
[ O N ]
On-Screen Display
BLACK SCREEN