Sony DAV-HDX475 - Manual (Page 77)

Contr
o
l f
o
r HDMI/
Extern
al A
u
dio
D
e
vic
e
77 GB
Using an S-AIR Product
(DAV-HDX275/DAV-HDX475 only)
The unit is compatible with the S-AIR function
(page 104), which allows sound transmission
between S-AIR products.
When you purchase the S-AIR product, you
need to perform the following settings to
establish the sound transmission.
About S-AIR products
There are two types of S-AIR product.
• S-AIR main unit (this unit): This is for
transmitting sound. You can use up to three
S-AIR main unit. (The number of usable
S-AIR main unit depends on the use
environment.)
• S-AIR sub unit: This is for receiving sound.
– Surround amplifier: You can enjoy
surround speaker sound wirelessly.
– S-AIR receiver: You can enjoy system
sound in another room.
To make use of the S-AIR function, you need to
insert the wireless transmitter (not supplied) into
the unit and the wireless transceiver (not
supplied) into the S-AIR sub unit.
Note
• When you insert the wireless transmitter/transceiver,
make sure that the AC power cord (mains lead) is not
connected to a wall outlet (mains).
• Do not touch the terminals of the wireless transmitter/
transceiver.
To insert the wireless transmitter
into the unit
1
Remove the screws and detach the slot
cover.
Note
• Remove the screws from the slot cover bearing
the caution mark. Do not remove other screws.
• The slot cover is no longer necessary; however,
keep it after detaching.
2
Insert the wireless transmitter.
S-AIR sub unit
(surround amplifier)
S-AIR main unit
S-AIR sub unit
(S-AIR receiver)
Inserting the wireless
transmitter/transceiver
CENTER SUBWOOFER
DIGITAL IN
P B /C B P R /C R AUDIO IN Y R L
COAXIAL OPTICAL
FRONT R FRONT L SUR R SUR L
SPEAKER
COMPONENT VIDEO OUT TV/VIDEO
TV/VIDEO SPEAKER
EZW-T100
COAXIAL 75 AM FM
DMPORT
ANTENNA
HDMI OUT
VIDEO OUT
DC5V
0.7A MAX
EZ W-T 100
Rear of the unit
Slot cover