Useful features, Checking displays : continued – Sharp MD-MT866H User Manual

Page 37

Advertising
background image

37

Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

Useful Features

– Checking Displays –

To display the playing time of an indi-
vidual track

1

Whilst in the stop mode, move the right

shuttle switch to

5

5

5

5

5

or

4

4

4

4

4

to display the

track number and track name.

2

Press the DISP button to display the play-

ing time for that track.

Each time the right shuttle switch to

5

or

4

is

moved, the playing time of the previous or next
track will be displayed.

Checking the remaining amount of
battery level

The remaining amount of battery level is shown
by the battery indicator (

) during operation.

When the battery is completely discharged, the battery
indicator will flash. Recharge the battery or replace the
alkaline battery with a new one.

When the battery has run completely out, “BATT EMPTY
(LoBATT)” will appear. Then, the power will be discon-
nected automatically.

Notes:

If you use the battery which you stopped charging half-
way, “

” may appear. It does not mean that the bat-

tery is completely charged.

The battery indicator will not correctly display the remain-
ing capacity for approximately 10 seconds after the power
has been turned on.

When the AC adaptor or a separately available car adap-
tor is used, the battery indicator will not be shown.

The number of bars shown in the battery indicator may
increase or decrease, depending on the operation be-
ing performed. This is normal.

Track name

Track number

Playing time

Checking Displays : continued

When the battery
level is high

When the battery
level is very low

How to read the battery indicator

Advertising