Sony DAVX10 User Manual
Page 22
masterpage:Left
specdef v20060111
filename[G:\FM\Sony\0605\DAVX10_US\Source\3210565131\3210565131DAVX10\gb05gsa.fm]
model name [DAV-X10]
[3-210-565-13(1)]
22
US
To connect to a TV with DVI (digital visual interface) input
Use an HDMI (high-definition multimedia interface)-DVI (digital visual interface) converter cord (not
supplied) with an HDMI (high-definition multimedia interface)-DVI (digital visual interface) adaptor
(not supplied). The DVI (digital visual interface) jack will not accept any audio signals. Furthermore,
you cannot connect the HDMI OUT (high-definition multimedia interface out) jack to DVI (digital
visual interface) jacks that are not HDCP (high-bandwidth digital content protection) compliant (e.g.,
DVI (digital visual interface) jacks on the computer displays).
E
To connect a TV using the audio cords (not supplied)
Connect the unit and the TV using the audio cords.
You can enjoy the TV sound from all speakers in this system.
Connecting the TV with the digital optical cord (not supplied)
A TV with a digital optical out jack (TV with built-in digital satellite receiver, etc.) can be connected
to the TV (DIGITAL IN OPTICAL) jack instead of the TV (AUDIO IN) jacks.
The system can accept both the digital and analog signals. Digital signals have priority over analog
signals. If the digital signal ceases, the analog signal will be processed after a few seconds.
Tip
• When connecting the digital optical cord, insert the connector until it clicks.
White (L/audio)
Red (R/audio)
ANTENNA
TV
DMPORT
SPEAKER
A.CAL
MIC
AM
VIDEO
ECM-AC2
OUT
75 COAXIAL
S VIDEO
MONITOR OUT
VIDEO IN
COMPONENT VIDEO OUT
VIDEO
AUDIO
R
Y
(DVD
ONLY)
(DVD
ONLY)
(DVD ONLY)
2
1
P
B
/
C
B
P
R
/
C
R
L
SAT/CABLE IN
SAT/
CABLE
TV
VIDEO
VIDEO
DIGITAL IN
AUDIO
R
COAXIAL
COAXIAL
OPTICAL
OPTICAL
IMPEDANCE USE 4
L
AUDIO
IN
R
L
FM
OPTICAL
DIGITAL
OUT
TV with the digital optical jack
To TV (DIGITAL IN OPTICAL)
: Signal flow