Sony DAVX10 - Manual (Page 23)

G
e
tting
Sta
rte
d –
AD
V
ANCED –
masterpage:Right
specdef v20060111
filename[G:\FM\Sony\0605\DAVX10_US\Source\3210565131\3210565131DAVX10\gb05gsa.fm]
model name [DAV-X10]
[3-210-565-13(1)]
23 US
When connecting to a standard 4:3 screen TV
Depending on the disc, the image may not fit your TV screen.
To change the aspect ratio, see page 80.
Does your TV accept progressive signals?
Progressive is a TV image display method which reduces flickering, and sharpens the image.
To display using this method, you need to connect to a TV that accepts progressive signals.
“PROGRESSIVE” lights up in the front panel display when the system outputs progressive signals.
1
Press FUNCTION repeatedly to select “DVD.”
2
Press RESOLUTION.
Each time you press RESOLUTION, the display changes as follows:
x “P AUTO” (PROGRESSIVE AUTO)
Select this setting when:
– your TV accepts progressive signals, and,
– the TV is connected to the COMPONENT VIDEO OUT jacks.
Normally select this if the above conditions are met. This automatically detects the software type,
and selects the appropriate conversion method.
Note that the picture will not be clear or no picture will appear if you select these settings when
either of the above conditions are not met.
RESOLUTION
FUNCTION
With the cover opened.
t
“P AUTO” (PROGRESSIVE AUTO)
r
“P VIDEO” (PROGRESSIVE VIDEO)
r
“INTERLACE”
continued