Sony DAVX10 - Manual (Page 71)

O
the
r O
p
erati
ons
masterpage:Right
specdef v20060111
filename[G:\FM\Sony\0605\DAVX10_US\Source\3210565131\3210565131DAVX10\gb11oth.fm]
model name [DAV-X10]
[3-210-565-13(1)]
71 US
The DIGITAL MEDIA PORT (DMPORT)
adapter is for enjoying sound from a portable
audio source or computer. By connecting a
DIGITAL MEDIA PORT adapter, you can
enjoy sound from the connected component on
the system.
The DIGITAL MEDIA PORT adapter (TDM-
BT1, Bluetooth adapter) is supplied. For details,
see the operating instructions of TDM-BT1.
Also, you can use other type of DIGITAL
MEDIA PORT adapter.
Available DIGITAL MEDIA PORT adapters
vary in each area.
For details on connecting the DIGITAL MEDIA
PORT adapter, see “Other Components
Hookup” (page 25).
Note
• Connect the supplied DIGITAL MEDIA PORT
adapter (TDM-BT1) to the DMPORT1 jack on the
unit. Connect the other DIGITAL MEDIA PORT
adapter to the DMPORT2 jack on the unit.
• Do not connect an adaptor other than the DIGITAL
MEDIA PORT adapter.
• Do not connect or disconnect the DIGITAL MEDIA
PORT adapter to/from the unit while the system is
turned on.
• Wait a moment after turning on the system, then
operate the DIGITAL MEDIA PORT adapter.
• Depending on the type of DIGITAL MEDIA PORT
adapter (not supplied), images may also be output. In
this case, the system outputs a composite video signal
only regardless of the type of video signal.
Playing the connected
component on the system
1
Press FUNCTION repeatedly until
“DMPORT1” or “DMPORT2” appears in
the front panel display.
2
Start playback of the connected
component.
The sound and images from the connected
component are played on the system or
connected TV.
For operation details of the supplied
DIGITAL MEDIA PORT adapter (TDM-
BT1), see the operating instructions of the
TDM-BT1. For operation details of the
other DIGITAL MEDIA PORT adapter
(not supplied), see the operating
instructions of each adapter.
Tip
• When listening to MP3 or other compressed music
using a portable audio source, you can enhance the
sound. Press SOUND FIELD repeatedly until
“AUTO” or “P.AUDIO” appears in the front panel
display. To cancel, select “2CH STEREO.”
Note
• Depending on the type of DIGITAL MEDIA PORT
adapter (not supplied), you may be able to operate a
connected component using either the buttons on the
remote or the control unit. The following illustration
shows an example of buttons that can be used in this
case.
Using the DIGITAL MEDIA
PORT Adapter
H
./>
x
X