Sony STR-DN1010 - Manual (Page 100)

100 GB
D:\NORM'S JOB\SONY HA\SO0087\STR-DN1010_PMRF\GB\GB05ENJ_STR-DN1010-CEL.fm masterpage: Left
STR-DN1010
4-174-068-12(1)
Lets you enjoy the TV sound from the
speakers connected to the receiver via an
HDMI cable. For details, see “Enjoying the
TV sound via an HDMI cable” (page 74).
x ON
Audio signal is input to the HDMI TV OUT
jack.
x OFF
Audio signal is input to the TV OPTICAL IN
or TV AUDIO IN jack.
Note
This parameter is not available when “Ctrl for
HDMI” is set to “OFF”.
System Settings menu
You can customize the settings of the receiver.
Lets you set the receiver switch to standby
mode automatically when you do not operate
the receiver or when there is no signals input to
the receiver.
x ON
Switches to standby mode after approximately
30 minutes.
x OFF
Does not switch to standby mode.
Notes
• This function does not work in the following cases.
– TUNER input is selected.
– S-AIR receiver or surround amplifier is used.
• If you use the Auto standby mode and the Sleep
Timer at the same time, the Sleep Timer has
priority.
ARC (Audio Return Channel)
Auto Standby