Bi-amplifier connection – Sony STR-DN1010 User Manual

Page 22

Advertising
background image

22

GB

D:\NORM'S JOB\SONY HA\SO0087\STR-DN1010_PMRF\GB\GB04GET_STR-DN1010-CEL.fm

masterpage: Left

STR-DN1010

4-174-068-12(1)

a)

Notes on the SPEAKERS SURROUND BACK/
FRONT HIGH/BI-AMP/FRONT B terminals
connection.
– If you connect only one surround back speaker,

connect it to L of this terminals.

– If you are not using surround back speaker or

front high speakers, and you have an additional
front speaker system, connect the additional
front speaker system to this terminals.

Set “SB Assign” to “Speaker B” in the Speaker
Settings menu (page 91).

You can select the front speaker system you
want using the SPEAKERS button on the
receiver (page 37).

– If you are not using surround back speaker or

front high speakers, you can connect the front
speakers to this terminals using bi-amplifier
connection (page 22).

Set “SB Assign” to “BI-AMP” in the Speaker
Settings menu (page 91).

b)

When you connect a subwoofer with an auto
standby function, turn off the function when
watching movies. If the auto standby function is
set to on, it turns to standby mode automatically
based on the level of the input signal to a
subwoofer, then sound may not be output.

Notes

• Before connecting the AC power cord (mains

lead), make sure that metallic wires of the speaker
cords are not touching each other between the
SPEAKERS terminals.

• After you have install and connect your speaker, be

sure to select the speaker pattern from the Speaker
Settings menu (page 91).

If you are not using surround back speakers or
front high speakers, you can connect the front
speakers to the SPEAKERS SURROUND
BACK/FRONT HIGH/BI-AMP/FRONT B
terminals using a bi-amplifier connection.

Connect the jacks on the Lo (or Hi) side of the
front speakers to the SPEAKERS FRONT A
terminals, and connect the jacks on the Hi (or
Lo) side of the front speakers to the
SPEAKERS SURROUND BACK/FRONT
HIGH/BI-AMP/FRONT B terminals.
Make sure that metal fittings of Hi/Lo attached
to the speakers have been removed from the
speakers. Not doing so may cause a
malfunction of the receiver.
After you have made the bi-amplifier
connection, set “SB Assign” to “BI-AMP” in
the Speaker Settings menu (page 91).

Bi-amplifier connection

Hi

Lo

Hi

Lo

Front speaker

(Right)

Front speaker

(Left)

Advertising