Tuner operations, Listening to fm/am radio, Age 53, 57) – Sony STR-DN1010 User Manual

Page 53: Recording onto a recording media tuner operations

Advertising
background image

53

GB

D:\NORM'S JOB\SONY HA\SO0087\STR-DN1010_PMRF\GB\GB04GET_STR-DN1010-CEL.fm

masterpage: Right

STR-DN1010

4-174-068-12(1)

T

u

n

e

r Op

era

tio

ns

1

Press the input button of the
playback component.

You can also use INPUT SELECTOR

+/– on the receiver.

2

Prepare the playback
component for playing.

For example, insert the video tape you
want to copy into the VCR.

3

Prepare the recording
component.

Insert a blank video tape, etc. into the
recording component (connected to
VIDEO 1 OUT jacks) for recording.

4

Start recording on the
recording component, then
start playback on the playback
component.

Notes

• Some sources contain copy guards to prevent

recording. In this case, you may not be able to
record from the source.

• Only analog input signals are output from the

analog output jack (for recording).

• HDMI sound cannot be recorded.

Listening to FM/AM radio

You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and
AM antennas (aerials) to the receiver (page
35).

Tip

The tuning scale for direct tuning differs depending
on the area code as shown in the following table. For
details on area codes, see page 4.

* The AM tuning scale can be changed (page 55).

Recording onto a recording
media

Tuner Operations

Area code

FM

AM

U2, CA2

100 kHz

10 kHz*

CEK, ECE, AU1, TW2 50 kHz

9 kHz

V/v/b,

GUI MODE

MENU

TOOLS/
OPTIONS

SHIFT

Numeric
buttons

Advertising