Sony STR-DN1010 - Manual (Page 56)

56 GB
D:\NORM'S JOB\SONY HA\SO0087\STR-DN1010_PMRF\GB\GB04GET_STR-DN1010-CEL.fm masterpage: Left
STR-DN1010
4-174-068-12(1)
6
Press V/v repeatedly to select a
preset number, then press .
The station is stored as the selected preset
number.
7
Repeat steps 3 to 6 to preset
another station.
You can store station as follows:
• AM band: AM 1 to AM 30
• FM band: FM 1 to FM 30
1
Repeat steps 1 and 2 of
“Presetting FM/AM radio
stations (Preset Tuning)”.
2
Press V/v repeatedly to select
the preset station you want.
Preset numbers from 1 to 30 are available.
1
On “FM” or “AM” screen, press
V/v repeatedly to select the
preset number on which you
have stored the station and
which you want to name.
2
Press TOOLS/OPTIONS.
The option menu appears.
3
Press V/v repeatedly to select
“Name Input”, then press or
b.
4
Press V/v/B/b to select a
character, then press .
The name you entered is registered.
Using the Radio Data
System (RDS)
(Models of area code CEK, ECE,
AU1, TW2 only)
This receiver allows you to use Radio Data
System (RDS), which enables radio stations to
send additional information along with the
regular program signal. This receiver offers
convenient RDS features, such as Program
Service name display.
Notes
• RDS is operable only for FM stations.
• Not all FM stations provide RDS service, nor do
they provide the same type of services. If you are
not familiar with the RDS services in your area,
check with your local radio stations for details.
Simply select a station on the FM
band using Direct Tuning (page 54),
Auto Tuning (page 54), or Preset
Tuning (page 55).
When you tune in a station that provides RDS
services, “RDS” lights up and the program
service name appears on the display.
Note
RDS may not work properly if the station you tuned
to is not transmitting the RDS signal properly or if
the signal strength is weak.
Tip
When a Program Service name is displayed, you can
check the frequency by pressing DISPLAY
repeatedly (page 47).
Tuning to preset stations
Naming preset stations (Name
Input)
Receiving RDS broadcasts