Sony STR-DN1010 - Manual (Page 71)

71 GB
D:\NORM'S JOB\SONY HA\SO0087\STR-DN1010_PMRF\GB\GB05ENJ_STR-DN1010-CEL.fm masterpage: Right
STR-DN1010
4-174-068-12(1)
“BRA
VIA” Sy
nc
Features
If your TV is not compatible with
the “Control for HDMI-Easy
Setting” function
1 Perform the steps given in “If your TV is
compatible with the “Control for HDMI-
Easy Setting” function” (page 70).
2 Press GUI MODE.
After “MENU ON” appears on the display
for a while, “GUI” appears and the GUI
menu appears on the TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
3 Press V/v repeatedly to select
“Settings”, then press or b.
The Settings menu list appears on the TV
screen.
4 Press V/v repeatedly to select “HDMI”,
then press or b.
5 Press V/v repeatedly to select “Ctrl for
HDMI”, then press or b.
6 Press V/v repeatedly to select “ON”,
then press .
The Control for HDMI function is set to on.
7 Set the Control for HDMI function of the
connected component to on.
If the Control for HDMI function for the
connected component is already set to on,
you do not need to change the setting.
For details on setting the TV and connected
components, refer to the operating
instructions of the respective components.
Notes
• Before you do the “Control for HDMI-Easy
Setting” from the TV, be sure to turn on the TV,
connected components and receiver.
• If the playback components cannot function after
you have made the settings for “Control for HDMI-
Easy Setting”, check the Control for HDMI setting
on your TV.
• If the connected components do not support
“Control for HDMI-Easy Setting”, you need to set
the Control for HDMI function for the connected
components to on before you perform the “Control
for HDMI-Easy Setting” from the TV.
V/v/b,
GUI MODE
MENU