Connecting a vcr – Samsung HCM5525WB User Manual

Page 18

Advertising
background image

2.5

C

HAPTER

T

WO

: I

NSTALLATION

I

N S TA L L AT I O N

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a
cable TV system (according to the instructions on pages 2.1-2.3). Skip step 1 if you have
not yet connected to an antenna or a cable system.

1

Connect a coaxial cable between the
ANTENNA OUT terminal on the VCR and the
antenna terminal on the TV.

A coaxial cable is usually included with a
VCR. (If not, check your local electronics
store).

2

Connect a set of audio cables between the
AUDIO OUT jacks on the VCR and the
AUDIO jacks on the TV.

If you have a mono VCR, connect L(mono)
to VCR audio out using only one audio
cable.

3

Connect a video cable between the VIDEO
OUT jack on the VCR and the VIDEO jack on
the TV.

If you have a S-VHS VCR, use the S-Video
connections and remove the video cable.
Do not connect the video cable and the S-
Video cable to video 1 simultaneously.

Follow the instructions in “Viewing a VCR
or Camcorder Tape” to view your VCR tape.

Note: This figure shows the Standard Connector-jack panel. The actual configuration on your TV may
be different, depending on the model.

Advertising