Sony DAV-DZ730 - Manual (Page 55)

Co
n
ven
ient
Func
tions
55 GB
To set the ID of the surround
amplifier
Refer to the operating instructions of the
surround amplifier.
To set the ID of the S-AIR
receiver
Refer to the operating instructions of the S-AIR
receiver.
You can enjoy the system’s sound in another
room by using the S-AIR receiver.
1
Press SYSTEM MENU.
2
Press X/x to select “S-AIR MODE,”
then press or c.
The selected item appears in the front panel
display.
3
Press X/x to select the desired setting,
then press .
• “PARTY”: You can set the S-AIR
receiver to output the same sound as the
main unit.
• “SEPARATE”: You can set the S-AIR
receiver to output the sound selected via
the S-AIR receiver itself.
4
Press SYSTEM MENU.
5
When you select “SEPARATE” in Step
3, press S-AIR CH on the S-AIR receiver
to select the function.
The S-AIR receiver’s function changes as
follows.
“MAIN UNIT”
t “TUNER FM” t
“AUDIO IN” t …
To enjoy the same function as the main unit,
select “MAIN UNIT.”
6
Adjust the volume on the S-AIR
receiver.
You can receive the system’s sound by the
S-AIR receiver while the main unit is in standby
mode by setting “S-AIR STBY” to “STBY ON.”
1
Press SYSTEM MENU.
2
Press X/x to select “S-AIR STBY,” then
press or c.
The selected item appears in the front panel
display.
3
Press X/x to select the desired setting,
then press .
• “STBY ON”: You can receive the
system’s sound by the S-AIR receiver
while the unit is in standby mode or turned
on.
• “STBY OFF”: You cannot receive the
system’s sound by the S-AIR receiver
while the unit is in standby mode.
4
Press SYSTEM MENU.
Note
• When you turn the system off while “S-AIR STBY”
is set to “STBY ON,” “S-AIR” flashes (when
wireless transmission between the unit and S-AIR
receiver is not activated), or lights up (when wireless
transmission between the unit and S-AIR receiver is
activated) in the front panel display.
When using S-AIR products, neighbors may
also receive your system’s sound if IDs are the
same, or you may receive sound from neighbors.
To prevent this, you can identify the unit with a
specific S-AIR sub unit by performing the
pairing operation.
Enjoying the system’s sound in
another room
For the S-AIR receiver
Enjoying sound by the S-AIR
receiver while the main unit is
in standby mode
For the S-AIR receiver
Identifying the unit with a
specific S-AIR sub unit
(Pairing operation)
For the surround amplifier
For the S-AIR receiver