Samsung ML-4551ND - Manual (Page 21)

2.6
<System setup>
Emulation menu
Use the 6. Emulation menu to configure printer language emulation.
PCL
This menu sets the PCL emulation configuration. You can set the font
type, symbol type, lines per page, and font size.
Item Explanation
Emulation
Type
The printer language defines how the computer
communicates with the printer.
If you select Auto, your printer can change the
printer language automatically.
Setup
See the following tables to configure properties of the
printer language.
Item Explanation
Typeface
You can select the standard font to be used in PCL
emulation.
• PCL1~PCL7’s interval between letters is fixed, and
PCL8~PCL45’s interval is proportional to the font
type and font size. You can adjust the font size of
PCL1~PCL7 using the Pitch item, and
PCL8~PCL45 can do using
Point Size item.
• PCL46~PCL54’s interval and font size are fixed.
Symbol
This item selects the symbol set to be used in PCL
emulation. The symbol is the group of numbers,
marks, and special signs being used when printing
letters.
Depending on the Typeface setting, available symbol
sets vary.
Point Size
When you select one between PCL8 and PCL45 from
the Typeface menu, you can determine the font size by
setting the height of the characters in the font.
Courier
This item lets you select the version of Courier font to
use.
Values: Auto, PCL, PostScript, EPSON,
HEXDUMP, PS3, IBM ProPrint
Values: PCL, PostScript, EPSON
Values: PCL1 ~ PCL54
Values: ROMAN8 ~ PCCYRIL
Values: 4.00 ~ 999.75 (0.25 unit)
Values: Regular, Dark
PostScript
This menu provides you with the Print PS Error menu item.
EPSON
This menu sets the EPSON emulation configuration.
Pitch
When you select one between PCL1 and PCL7 from
the Typeface menu, you can determine the font size by
setting the number of characters that will print in one
horizontal inch of type. The default value, 10 is the
best size.
Lines
This item allows you to set vertical spacing from 5 to
128 lines for the default paper size. The default
number of lines may differ according to the paper size
and printing orientation.
Item Explanation
Print PS
Error
You can select whether or not your printer prints an
error list when a PS error occurs.
• Select On to print PS 3 emulation errors. If an error
occurs, the job stops processing, the error message
prints, and the printer flushes the job.
• If this menu is set to Off, the job is flushed without an
indication of the error.
Item Explanation
Font
You can select the default font will be used in EPSON
emulation.
Character
Set
This item allows you to select a character set of the
desired language.
Character
Tab.
This item selects the character set.
Item Explanation
Values: 0.44 ~ 99.99 (0.01 unit)
Values: [5 ~ 128]:64
Values: On, Off
Values: SANSERIF, ROMAN
Values: USA, FRANCE, GERMANY, UK,
DENMARK1, SWEDEN, ITALY, SPAIN1, JAPAN,
NORWAY, DENMARK2, SPAIN2, LATIN
Values: ITALIC, PC437US, PC850