Sony BRC-Z700 User Manual
Hd 3cmos color video camera, Brc-z700
Advertising
E:\_NOUHIN_Nagashima\-TAKADA\3-287-510-11(1)\3287510111BRCZ700WW\for PrintPDF
COVdata\01COV_4.5mm.fm
masterpage: Left
BRC-H700
3-287-510-11 (1)
Operating Instructions
3-287-510-11 (1)
HD 3CMOS Color
Video Camera
© 2007 Sony Corporation
BRC-Z700
3287510110
Sony Corporation
Printed in Japan
Printed on recycled paper.
Advertising
Table of contents
Document Outline
- Table of Contents
- Getting Started
- Overview
- Features
- System Components
- System Configuration
- Operating a BRC-Z700 Camera Using the Supplied Remote Commander
- Operating a BRC-Z700 Camera Using the RM-BR300 Remote Control Unit
- Operating Multiple BRC-Z700 Cameras Using the RM-BR300 Remote Control Unit
- Operating a BRC-Z700 Camera from a Long Distance
- Operating Multiple BRC-Z700 Cameras from a Long Distance
- Using BRC-Z700 Cameras and VISCA-controllable Cameras in the Same System
- Transmitting Audio Signals Using the BRU-H700
- Using the BRBK-MF1 HD Optical Multiplex Card and the HFBK-TS1 HDV Interface Board to Input Audio and Video Signals Simultaneouly to the HDV Video Equipment
- Location and Function of Parts
- Camera
- Remote Commander (supplied)
- RM-BR300 Remote Control Unit (not supplied)
- BRU-H700 HD Optical Multiplex Unit (not supplied)
- BRBK-MF1 HD Optical Multiplex Card (not supplied) (available with the BRC-Z700 only)
- BRBK-HSD1 HD/SD-SDI Output Card (not supplied) (available with the BRC-Z700 only)
- HFBK-SD1 SD Interface Board (not supplied) (available with the BRU-H700 only)
- HFBK-HD1 HD Interface Board (not supplied) (available with the BRU-H700 only)
- HFBK-XG1 XGA Interface Board (not supplied) (available with the BRU-H700 only)
- HFBK-TS1 HDV Interface Board (not supplied) (available with the BRU-H700 only)
- Adjusting and Setting With Menus
- Operation Using the Supplied Remote Commander
- Operation Using the RM-BR300 Remote Control Unit
- Installation and Connections
- Installation
- Connections
- Connecting to an AC Outlet
- Connecting the RM-BR300 Remote Control Unit
- Connecting a Monitor, etc. Equipped with the Analog Component (YPbPr) Input Connector
- Connecting a Device Equipped with VISCA RS-232C Connector
- Connecting a Device Equipped with VISCA RS-422 Connector
- Connecting a Video Monitor, VTR, etc. Equipped with Composite Video or S Video Input Connector
- Connecting a VTR Equipped with SDI Input Connector
- Connecting a VTR Equipped with HD-SDI Input Connectors
- Connecting the BRU-H700 HD Optical Multiplex Unit
- Connecting a Video Switcher
- Connecting a Sync Signal Generator
- Appendix