Samsung SL10D10 - Manual (Page 20)

12
Getting Connected
Getting Familiar 12
33 11 22
Receiver LCD Panel
1) MENU – The menu appears and the previous level menu exits.
2) –/+ Sign – Adjust an option value respectively.
3) VOLUME – Use to control the volume.
Operations on the LCD Panel
1) Press the on the LCD front panel.
2) Use the –/+ Sign to move to an item you wish to select.
3) Press the to select the item you wish to adjust.
4) Use the –/+ Sign to adjust according to your preferences.
 The adjustment item is highlighted in red.

The new setting is applied.
5) When finishing the setting, select EXIT from the menu to exit.
Even when not selecting the EXIT menu, the menu automatically disappears after a few
seconds.
Your equipment may not look exactly like the model illustrated.
VOLUME VOLUME
The Setup Procedures to Use the
Volume Button on the Remote
Control
If the Volume button on the remote control
does not work or the remote control has
been reset, set up the Volume button
according to the following procedures.
1) Move the mode switch to TV.
2) Press and hold the MUTE and
SELECT keys until a light above the
mode switch on the remote flashes
twice.
3) Enter 1-0-7-6-6 in turn.
4) Move the switch back to DIRECTV
TIP