Running the system test – Samsung SL10D10 User Manual
Page 69
A remote control indicator light starts flashing.
The batteries in the remote control are running low and should be replaced soon. (Note that when you
replace the batteries, you may have to reprogram your remote to control other devices.)
Running the System Test
The System Test allows you to run a basic diagnostics check on your Samsung Fliptop powered by
DIRECTV
®
. If you are experiencing any trouble with your receiver, run the system test. It will also
allow you to get your access card and receiver ID numbers or to initiate diagnostic procedures on
your digital satellite receiver.
First make sure that:
All connections — jacks, cables, etc. — are in place correctly (see Chapter Two,
Getting Connected, for more information)
There are batteries in the remote control, and they are working correctly
The access card is installed in the Samsung Fliptop powered by DIRECTV
®
.
Troubleshooting
Chapter 5
61