Samsung SL10D10 - Manual (Page 62)

Programming Your Remote Control
You can program the DIRECTV remote control to operate your additional equipment such as a
DVD, VCR, stereo.
1) Press the MENU key to display the Quick Menu.
2) Highlight
Settings and press SELECT.
3) Highlight Setup and press SELECT.
4) SELECT the Remote item from the left menu.
5) Follow the on-screen instructions to program your remote for your Samsung Fliptop powered
by DIRECTV ® or additional equipment (AV1 and AV2).
If you would like to change the VOL and MUTE to work with another component, you can.
Simply set up your remote to work with the component, and then move the slide switch to the
position you would like to lock the VOL and MUTE keys to. Point the remote away from your
Samsung Fliptop powered by DIRECTV
® and press and hold MUTE and SELECT until the
light near the slide switch blinks twice (about 5 seconds). Enter 9-3-3. The light will blink twice,
indicating the VOL and MUTE are now locked to the chosen component, no matter what position
the slide switch is in.
Other Information
Programming Your Remote Control 54