Sony DAVLF1H - Manual (Page 39)

Ge
tti
ng Sta
rte
d –
AD
V
ANCED –
39 US
To connect to a TV with DVI (digital visual interface) input
Use an HDMI (high-definition multimedia interface)-DVI (digital visual interface) converter cord (not
supplied) with an HDMI (high-definition multimedia interface)-DVI (digital visual interface) adaptor
(not supplied). The DVI (digital visual interface) jack will not accept any audio signals. Furthermore,
you cannot connect the HDMI OUT (high-definition multimedia interface out) jack to DVI (digital
visual interface) jacks that are not HDCP (high-bandwidth digital content protection) compliant (e.g.,
DVI (digital visual interface) jacks on PC displays).
Connecting the TV with the digital optical cord
The TV with the digital optical out jack (such as the TV that has digital satellite tuner, etc.) can be
connected to the TV (DIGITAL IN OPTICAL) jack instead of the TV (AUDIO IN) jacks of the rear of
the subwoofer.
The system can accept both the digital and analog signals. Digital signals have priority over analog
signals. If the digital signal ceases, the analog signal will be processed after 2 seconds.
Tip
• When connecting the digital optical cord, insert the connector until it clicks.
OPTICAL
DIGITAL
OUT
VIDEO 1 VIDEO 2
VIDEO 2
TV VIDEO 1 TV
AUDIO IN AUDIO IN AUDIO IN DIGITAL IN
OPTOCAL
L
R
DIGITAL IN
DIGITAL
IN
COAXIAL
COAXIAL
ECM-AC1
TV with the optical digital jack Rear of the subwoofer
To the optical
digital output jack