Servis-Rhino 1495 - Manual (Page 88)

OPERATION
1480/1485/1495 01/11 Operation Section 4-42
© 2011 Alamo Group Inc.
OPERA
T
ION
TROUBLE POSSIBLE CAUSE POSSIBLE REMEDY
Excessive wear on Bucket is riding on cutting Use boom “FLOAT” position or
cutting edge edge instead of wear runners. bucket level indicator to ensure
bucket rides on wear runners.
Bucket cutting edge Rear axle on tractor not level With tractor on level surface,
not flat on the ground. from side to side. compare rear axle height from left
to right, measuring from axle center
to ground. Adjust air pressure in rear
tires until axle height measures the
same for both sides.