Step 2 : setting up the remote commander, Inserting the batteries, Using the remote commander – Sony SLVD380P User Manual

Page 11

Advertising
background image

Getti

ng Sta

rted

11

US

Setting up the remote commander

Step 2 : Setting up the remote commander

Inserting the batteries

Insert two size AA (R6) batteries by matching
the + and – on the batteries to the diagram
inside the battery compartment.

Insert the negative (–) end first, then push in
and down until the positive (+) end clicks into
position.

Reattach the cover after inserting the batteries.

Using the remote commander

You can use this remote commander to operate
this DVD-VCR and a Sony TV. Buttons on the
remote commander marked with an orange dot
(•) can be used to operate your Sony TV.
If the TV does not have the

symbol near the

remote sensor, this remote commander will not
operate the TV.

To operate

Set TV / DVD·VIDEO switch to

the DVD player

DVD·VIDEO, then press SELECT DVD and point at the remote sensor at the
DVD-VCR

.

the VCR

DVD·VIDEO, then press SELECT VIDEO and point at the remote sensor at the
DVD-VCR

.

your TV

TV and point at the remote sensor at your TV.

TV / DVD·VIDEO
switch

Remote sensor

SELECT VIDEO

SELECT DVD

continued

Advertising
This manual is related to the following products: