Connecting a cable box or satellite receiver – Sony SLVD380P User Manual

Page 16

Advertising
background image

16

US

Basic hookups

With this hookup, you can record any channel on the cable box or satellite receiver. Be sure that the
cable box or satellite receiver is turned on. To watch cable or satellite channel, you need to match the
DVD-VCR’s input source (L1) to the input jack connected to the cable box or satellite receiver (LINE
IN 1).

Tip
• You can also connect a cable box or satellite receiver using the LINE-2 IN jacks on the front

panel (page 84).

Note
• The DVD-VCR cannot record programs if you have:

a cable box without audio/video outputs.

cable with no cable box

.

– antenna only (no cable TV).

Connecting a cable box or satellite receiver

to LINE IN 1

: Signal flow

Antenna cable (not supplied)

to antenna input

Wall

TV

Audio/video cord
(not supplied)

Cable box/
satellite receiver

DVD-VCR

Advertising
This manual is related to the following products: