Sunbeam EXPRESSBAKE EXPRESS BAKETM Breadmaker - Manual (Page 32)

If you experience difficulties when operating the breadmaker,
review the troubleshooting information in this section to find
a solution. If you are unable to find a solution, please call
our Consumer Relations Department at 1-800-667-8623.
IF
You
HAVE
A
P
OWER
O
UTAGE
If the power goes out while you are using your breadmaker,
the display will go blank.
l
If the breadmaker is kneading the bread, you can restart
the machine and continue.
l
If the machine is baking bread, either finish baking the bread
in an oven or start from scratch with a new loaf.
When the power comes back on, you should do the following:
1
Hold down the “Start/Stop” button for at -least 3 seconds.
If the display does not return to the time setting before the
outage, unplug the breadmaker and then plug it back in.
2 If the machine still does not start, hold down the
“Start/Stop” button a second time for 3 seconds.
Continue to unplug and replug the machine and
hold down the “Start/Stop” button until the display
returns to the cycle time before the power outage.