Selecting the heat mode – Samsung AQT18WJWB User Manual
Page 11
ENGLISH
Selecting the Heat Mode
You can select the Heat mode if you want to heat your room.
You can adjust the temperature and the fan speed when heating.
E-
11
To control the airflow direction, refer to pages 16 and 17.
5
Press the
button to adjust the temperature until the required
temperature is displayed.
You can set the temperature between 16°C and 30°C.
Result:
◆
Each time you press the
button :
- The temperature is adjusted by 1°C
- The indoor unit beeps
◆
If the room temperature reaches 5°C higher than the set
temperature, the air conditioner stops heating, but the fan
operates consistently.
◆
If the room temperature reaches 3°C lower than the set
temperature, the air conditioner starts heating again.
3
Press the button on the remote control until is displayed.
Result:
◆
The indoor unit beeps each time you press the
button.
◆
The air conditioner runs in the Heat mode.
2
You can change modes at any time.
N
N
N
N
o
o
o
o
tt
tt
e
e
e
e
1
If necessary, press the button.
Result:
◆
The operation indicator on the indoor unit lights up.
◆
The air conditioner starts up in the mode you selected last.
◆
The indoor unit beeps.
Press the
button to select the fan speed until the required setting
is displayed.
Automatic (rotated : )
Low
Medium
High
Turbo (Maximum)
Result:
◆
Each time you press the
button, the indoor unit beeps.
◆
For the first 3~5 minutes, the fan may not operate to
prevent the cool air from running out of the indoor unit.
It helps to warm the air in your room sufficiently.
4