Samsung YP-N30S - Manual (Page 8)

15 14
Connecting yepp to PC with USB cable
When USB driver is not Installed automatically,
refer to next page. 8
When USB driver is installed, "SAMSUNG YP-N30” will appear in
[System Properties]
➝ [Device Manager] as shown in the picture
to the right.
7
N N o o t t e e : :
How to check USB driver How to check USB driver
Windows 98,ME:
Control Panel
➝ System ➝ Device Manager ➝
Universal Serial Bus controllers/SCSI and RAID controllers
Windows 2000:
Control Panel
➝ System ➝ Hardware ➝
Device Manager
Windows XP:
Control Panel
➝ System ➝ Hardware ➝
Device Manager
USB connect cable
Plug one end of the USB cable into the
USB port on the back of the PC. 3
Insert the battery into the yepp and turn
on the power. 4
Slide down the bottom cover of the player.
Plug the other end of the USB cable
into the USB port on the right side at the bottom.
● PC may temporarily malfunction if you unplug the
USB cable from PC while yepp Explorer is initiating or
executing a command.
5
USB driver is installed a message saying that it is
searching for a new device. You may not see the
display screen during installation.
Go to the device manager to check that installation
has been successfully completed. 6
N30-America 3/21/03 3:19 PM Page 14