Samsung SF 110T - Manual (Page 72)

S
PECIAL
F
EATURES
5.14
C HAPTER F IVE : S PECIAL F EATURES
5
Setting Telephone Answering Machine Options
These instructions assume youÕve followed the steps above under ÒSetting an OptionÓ
and the machine is asking if you want to change one of the Telephone Answering
Machine options listed here.
¥ Call Transfer - This feature allows the fax machine to transfer an incoming callerÕs
message to a specified remote location.
Choose YES to turn on the Call Transfer feature, and enter the telephone number to
which it should be transferred.
Choose NO to disable the feature.
¥ Call Monitoring - Call Monitoring enables you to listen on the speaker while callers
leave messages on your machine.
Choose YES to turn on Call Monitoring.
Choose NO to turn off Call Monitoring.
¥ Charge saver - This feature lets you dial into your machine from a remote phone and
check whether anyone has left a message without being charged for a charge call.
When charge saver is on and there are messages waiting to be heard, the machine
answers on the number of rings you specify in the ring count option. If there are no
messages, the machine answers on the second ring after the number specified. This
gives you time to hang up the phone before the machine answers - and saves the price
of the call.
Choose YES to turn on charge saver.
Choose NO to turn off charge saver.
¥ Message Recording Time - You can select the maximum time allowed for caller
messages and memos.
If you press START/COPY, the LCD shows you the time limits available: 0, 30, 60, or 90
seconds. Choose the proper time. If you choose 0, it allows callers to hear the greeting
message but doesnÕt permit them to leave messages.
¥ Remote Password - You can change the three-character password used to access your
machine from a remote phone. The password is preset to Т#139#У at the factory. The
first and the last #s are fixed, but you can change the middle numbers. The machine
doesnÕt accept double continuous character codes (011, 223, etc.) as passwords, because
line conditions can occasionally make the machine fail to recognize a double digit code.
Each the characters you want to use, then press START/COPY.
¥ Battery Alarm - You can turn on the Battery Alarm feature. With this feature on, the
machine displays a low battery message in the LCD display and sounds beeps to alert
you of the low battery condition.
Choose YES to turn on the Battery Alarm feature.
Choose NO to turn off the Battery Alarm feature.
¥ Check battery - If you want to check the remains of the battery, Press START button.
The machine displays the remaining capacity of the battery in the display.
EURO(M)-Chapter 5 3/26/98 3:34 PM Page 15