Samsung SF-370 Series - Manual (Page 65)

8.8
Memory Full Memory has become full while receiving a fax or short message. Fax/Telephone
Memory Full
Press OK to continue Memory has become full while scanning a document. Press OK
to send or copy the scanned pages only. To cancel the job press
Stop/Clear and try again when memory becomes available, or
split the new document into smaller parts.
Fax/Copy
Memory Received
When it toggles with:
Ink Low. Install new ink cartridge
Load paper and press OK
Install ink cartridge
The machine has data stored in memory. Depending on the
message do as follows:
Replace the print cartridge with new one.
Load the paper, and press OK . There might be a jam. Clear the
jam as described in "Paper jams during printing" on page 8.12.
Install a print cartridge.
Fax
No answer from remote fax The other machine has not answered after all your attempts to
send a fax. Fax
No CID Number The machine could not detect the CID (Caller ID) number. Telephone
No Dial Number There is no number in the redial memory, which is successfully
dialled up to now. Telephone
No Message There is no message to play or erase. There is no received short
message to read or print. TAM
(SF-375TP only)
No New Message There is no new caller message. There is no received short
message. TAM
(SF-375TP only)
Not available while reprinting fax The machine can not receive a new fax while printing the stored
faxes. Fax
Not Found The number you are searching does not exist in memory. Telephone
Number already registered The number you are trying to register already exists in the
phonebook or junk fax list. Telephone
Number Not Assigned There is no number assigned to the One-Touch or two-digit
Speed number. Telephone
OK Again The number that you entered is outcide the range of speed dial
number, i.e. more than 100. Fax/Telephone
Poll Code Error The remote user entered wrong poll code. Fax
Poll job exists already You have programmed a polling send. Cancel scheduled job and
try again. Fax
Polling Error
Check remote site The machine you want to poll is not ready to answer your poll.
The person you are polling should have loaded their fax machine
with a document and be in send poll state. Fax
Processing Job You attempt to enter My Favorites, while sending My Favorites
document or printing My Favorites document. Fax
Receiving Error.
Ask sender to try again. There is an error while receiving a fax. Fax
Record TAM OGM To select TAM (Telephone Answering Machine) receive mode,
you should record OGM Out Going Message ) prior to pressing
the Answer button.
TAM
(SF-375TP only)
Remove jammed document The document you are sending has jammed in the feeder. To
clear the document jam, see "Document jams during
transmission" on page 8.12.
You tried to copy or fax a document which is longer than
390 mm. Document
Display Status/Solution Related to: