Replacing the toner cartridge – Samsung ML-3470D User Manual

Page 41

Advertising
background image

8

.4

<Maintenance>

Note

If toner gets on your clothing, wipe it off with a dry cloth and
wash clothing in cold water. Hot water sets toner into fabric.

4

Hold the toner cartridge by the handle and slowly insert the
cartridge into the opening in the printer.

5

Tabs on the sides of the cartridge and corresponding grooves
within the printer will guide the cartridge into the correct position
until it locks into place completely.

6

Close the front cover. Make sure that the cover is securely closed.

Replacing the toner cartridge

When the toner cartridge is completely empty:
Toner Low Replace Toner appears on the display.
• The Smart Panel program window appears on the computer telling

you that the toner cartridge is empty.

• The Status LED blinks red.

At this stage, the toner cartridge needs to be replaced. For order
information for toner cartridges, see page 7.1.

1

Open the front cover.

2

Pull the toner cartridge out.

3

Remove the new toner cartridge from its bag.

Caution

Do not use sharp objects, such as a knife or scissors, to open
the toner cartridge package. They might scratch the drum of
the cartridge.

4

Remove the packing tape and roll the cartridge 5 or 6 items to
distribute the toner.

Thoroughly roll the cartridge to assure maximum copies per
cartridge. Save the box and the plastic bag for shipping.

Cautions

• If toner gets on your clothing, wipe it off with a dry cloth and

wash clothing in cold water. Hot water sets toner into fabric.

• To prevent damage to the toner cartridge, do not expose it

to light for more than a few minutes. Cover it with a piece of
paper, if necessary.

• Do not touch the green surface underside of the toner

cartridge

. Use the handle on the cartridge to avoid touching

this area.

5

Hold the toner cartridge by the handle and slowly insert the
cartridge into the opening in the printer.

6

Tabs on the sides of the cartridge and corresponding grooves
within the printer will guide the cartridge into the correct position
until it locks into place completely.

7

Close the front cover. Make sure that the cover is securely closed.

Advertising