Using the video and audio input jacks (continued) – Sharp 25N S180 User Manual

Page 33

Advertising
background image

33

L

To watch video material playback.

• Press the Remote’s

INPUT to select VIDEO INPUT mode to which the video equipment you want to

playback is connected.

• The external VIDEO INPUT mode will change as follows each

time the

INPUT is pressed.

• INPUT mode can be selected by pressing either the

CH UP (

8

) on the TV remote control when the

TV is set to the highest channel stored in memory, or by pressing the

CH DOWN (

9

) when it is set to

the lowest channel.

• When connecting video or audio equipment to the television, be sure that the power is turned off in

order to prevent damage to either the television or the equipment being connected.

• The S-VIDEO terminal has priority over a VIDEO terminal (IN-1). When you want to watch pictures

from video equipment connected to a VIDEO terminal, unplug equipment connected to the
corresponding S-VIDEO terminal.

• It is the intent of SHARP that this product be used in full compliance with the copyright law and that

prior permission be obtained from copyright owners whenever necessary.

• For detailed information on the connection and use of auxiliary equipment, refer to the instruction

manuals of the equipment being used.

• The connection cords can be obtained from your local video store.

NOTE:

Using the Audio Output Jacks (25N-S180 and 27N-S180 only)

L

These jacks are used for connecting a standard stereo amplifier. Control of STEREO/MONO/
SAP, VOLUME and MUTE are retained at the TV. These jacks relay the audio signal of all
programs being displayed on the TV screen.

(AUDIO OUTPUT JACKS are located on the rear of the cabinet.)

CONNECTIONS

(1) Before connecting the

cord, turn on the TV and
adjust the VOLUME
control on the TV for a
moderate listening level.

(2) Turn off the TV and

connect the audio cord to
the AUDIO LINE OUTPUT
JACKS on the TV.

(3) Turn the TV set and stereo

amplifier on.

(4) If you desire, you can

turn off the sound to the
TV’s internal speakers by
SPEAKER mode. See
page 13 - 14.

(5) Adjust the VOLUME

control on the stereo
amplifier for a moderate
listening level.

(6) Control of the audio can be done using the audio controls (STEREO/MONO/SAP, VOLUME, and

MUTE), from either the remote control, or directly from the TV set.

• For detailed information on the connection and use of auxiliary equipment, refer to the operation

manuals of the equipment being used.

• When connecting monaural equipment to the AUDIO INPUT or OUTPUT of this set, use an audio

connection cord and plug adapter as shown below.

• For optimal sound quality, it is recommended to keep the TV’s audio output level high.

(Rear connection

terminals of TV)

To the TV

Pin plug x 2

Pin plug

Plug adapter

To the equipment

being connected

Pin jack/Mini plug

NOTE:

Using the Video and Audio Input Jacks (Continued)

32-40 25&27NS100/180 1.4

6/1/00, 2:12 PM

33

Advertising
This manual is related to the following products: