Inserting the bobbin – SINGER 1408 User Manual

Page 20

Advertising
background image

Inserting the Bobbin

When inserting or removing the bobbin, the needle must

be fully raised.

Attention:

1. Open the hinged cover.

2. Pull the bobbin case tab (a) and remove the bobbin case.

3. Hold the bobbin case with one hand. Insert the bobbin so

that the thread runs in a clockwise direction (arrow).

4. Pull the thread through the slit and under the finger. Leave

a 6 inch tail of thread.

5. Hold the bobbin case by the hinged latch.

6. Insert it into the shuttle.

Turn power switch to off ("O") before inserting or removing

the bobbin.

EN

13

Advertising
This manual is related to the following products: