Sun Microsystems Sun Fire X4200 User Manual
Sun fire
Advertising
Table of contents
Document Outline
- Sun FireTM X4100 and Sun Fire X4200 Servers System Management Guide
- Contents
- Preface
- System Management and ILOM Overview
- Interfaces
- SP Initial Setup
- Remote Console Application
- Command Line Interface Overview
- Command Line Interface Reference
- Command Line Interface Tasks
- 7.1 How to Log In to the ILOM Service Processor CLI
- 7.2 About LDAP
- 7.3 How to Configure LDAP
- 7.4 How to Manage Access to the Service Processor
- 7.5 How to Manage the Host State
- 7.6 How to Manage ILOM Network Settings
- 7.7 How to Manage ILOM Serial Port Settings
- 7.8 How to Manage ILOM User Accounts
- 7.9 How to Manage SNMP User Accounts
- 7.10 How to Manage ILOM Alerts
- 7.11 How to Manage Clock Settings
- 7.12 How to Display Information About the Service Processor
- 7.13 Displaying Version Information
- 7.14 How to Update the Service Processor Firmware
- Sun ILOM Web GUI
- System Monitoring and Maintenance Using the SP GUI
- 9.1 How to Upgrade the SP Firmware
- 9.2 How to Reset the SP
- 9.3 How to Reset the SP and BIOS Passwords
- 9.4 How to View Replaceable Component Information
- 9.5 How to View Temperature, Voltage, and Fan Sensor Readings
- 9.6 How to Configure Alerts and View Alert Destinations
- 9.7 How to View and Clear the System Event Log
- 9.8 How to Enable SNMP Settings and View SNMP Users
- 9.9 How to Control the Server Locator Indicator
- Managing Redirection and Remote Control Using the SP GUI
- 10.1 About the Remote Console Software and Redirection
- 10.2 How to Control Power on the Host Server
- 10.3 How to Change the Mouse Mode
- 10.4 How to Start and Stop Console Redirection
- 10.5 How to Start and Stop CD-ROM Drive Redirection
- 10.6 How to Start and Stop Floppy Drive Redirection
- 10.7 How to Start and Stop Keyboard and Mouse Redirection
- System Configuration Using the SP GUI
- Managing System Information Using the SP GUI
- Managing Users Using the SP GUI
- Glossary
- Index