Intercom calls, Calling other stations, Answering intercom calls – Samsung ITP-5107SIP User Manual

Page 23: Voice announce mode, Auto answer mode

Advertising
background image

16

INTERCOM CALLS

CALLING OTHER STATIONS

Dial the extension number or group number.

Wait for the party to answer. If you hear a brief tone burst instead of ringback
tone, the station you called is set for Voice Announce or Auto Answer. Begin
speaking immediately after the tone.

Finish the call by replacing the handset.

NOTES:
1.

If you have a DSS button assigned to an extension or station group, you may
press this button instead of dialing the number.

2.

If the Hot Keypad feature has been turned off, you must first lift the handset
or press the SPEAKER button before you begin dialing.

ANSWERING INTERCOM CALLS

When your keyset rings, simply lift the handset—OR—press the FLASHING
CALL
button to be connected to the calling station.

To finish the call, replace the handset.

See Ring Preference under Customizing Your Keyset.

VOICE ANNOUNCE MODE

When another station calls you, your keyset will sound a brief attention tone and
you will hear the caller’s announcement.

Press the FLASHING CALL button to turn on the microphone and speak
handsfree—OR— lift the handset to reply.

To finish the call, replace the handset.

NOTE: In order for C.O. calls to be answered handsfree, AUTO ANS CO must be set
ON.

AUTO ANSWER MODE

When another station calls you, your keyset will sound a brief attention tone and
then automatically answer the call.

Your microphone and speaker are turned on and you can speak handsfree. For
privacy, use the handset.

To finish the call, replace the handset.

NOTE: In order for C.O. calls to be answered handsfree, AUTO ANS CO must be set
ON.

5107S_keyset.qxp 5/9/2006 9:56 AM Page 22

Advertising